First i made a test strip with the film to see how much light looks best. Once the test strip was made i realized that I used a bad test strip that had already been exposed to light so my test strip came out very black. I made a new test strip and decided the best image was achieved with F8 for 6 seconds. I then shot the film and my picture came out with streaks because i didn't agitate the chemicals enough. I did it again and got my finished product

Camera Know How 

1.) I am using the promaster and it is number 20.

2.) 

3.) You press the shutter release to take a picture.

4.) You change the shutter speed on the film speed dial.

5.) The shutter speeds are 1,2,4,8,15,30,60,125,250,500,1000,2000

6.) You change the aperture with the aperture ring.

7.) The aperture settings are 1,7,2.8,4,5.6,8,11,16,22

8.) You focus the camera with the focusing ring.

9.) Yes.

10.) The camera has enough light if the green light appears when you press the button down half way.

11.) You use the meter to adjust the light.
12.)
13.)You use 35mm film.
14.) The iso setting is to set the speed of the picture being taken.
15.)You rewind the film with the rewind knob.